E-mail: zqdicheng@chinadicheng.com
Malfunctions | Reason | Solution | ||
Blower | Can not rotate | Can rotated by hand | The motor is damaged | Repair or replace the motor |
Can rotated round by hand | The lobes are locked | Open to repair | ||
The impurity in blower | Open to clean | |||
Can rotate | Abnormal sound or vibration | Skid, v-belt is too tight or too loose | Adjust v-belt tension | |
Pulley offset | Reset pulley | |||
Pulley and belt cover friction | Adjust belt cover | |||
Bearing oil lack or aging | To replace the oil | |||
Gear oil lack or aging | To replace the oil | |||
The safe valve leakage | Adjust the safe valve | |||
Foundation insufficient strength | To strengthen the foundation strength | |||
Piping resonance | Eliminate by the silencer and support | |||
Exhaust pressure rises abruptly | See ※annotated | |||
Anchor bolt is too loose | Tighten | |||
Rotor interference | Open to repair | |||
The impurity in blower | Open to clean | |||
Check valve bad | Replace | |||
Overheating | Exhaust pressure rises abruptly | See ※annotated | ||
Temperature of working environment exceeds 40 ℃ | Ventilated working environment | |||
Inlet silencer obstruction | Cleaning/replace filter | |||
Airflow insufficient | Pipeline leaks | Tighten the pipe connection | ||
Inlet silencer obstruction | Cleaning/replace filter | |||
The safe valve leakage | Adjust the safe valve | |||
V-belt is too loose | Adjust v-belt tension | |||
Exhaust pressure rises abruptly | See ※annotated | |||
Exhaust pressure rises abruptly | Shut off the valve | Fully open the valve | ||
The water level rises | Adjust water level | |||
Inlet/outlet pipe jams | Cleaning debris | |||
Valve bad or twist reversed direction | Replace or reverse direction twist | |||
Airflow overpowered | Reduce round speed or exhaust | |||
Oil leak | Lubrication oil overmuch | Refuel to the center of oil standard |
Copyright © Shandong Dacheng Machinery Technology Co., Ltd All Rights Reserved | Sitemap | Powered by