How to properly maintain the rotz blower, to save the enterprise cost, to create more value!

Like the human body, roots blower products can say is we now have a strong physique, but even if we have a strong body, if you don't pay attention to preserve one's health, is also a little sick.Safe operation of the blower and the service life depends on the right and wrong is often maintenance and maintenance, and should pay attention to any failure, in addition to pay attention to the normal inspection, but also pay more attention to these items:

1. Check the fastening conditions of each part and the loosening of the positioning pin. If there is any loose, it should be tightened.

2. There is no oil seepage in the body of the blower.

3. No scaling, rusting and peeling can exist inside the blower body.

4. Pay attention to whether the oil cooling condition is normal, pay attention to the quality of lubricants, always listen to the blower's operation for the noise, and notice whether the unit is working under the specified conditions.

5. The overload of the blower is sometimes not immediately apparent, so pay attention to the changes in the exhaust pressure, the bearing temperature and the motor current to determine whether the machine is working properly.

6. When the machine is disassembled, the machine shall be measured with each matching dimension, make a good record, and mark and directional the parts, so as to ensure assembly and maintain the original matching requirements.

7. After the new machine or the major repair blower, according to the operation procedure, it is recommended to replace the whole lubricating oil after 8 hours.

8. The unit must be replaced for 1000 hours under normal conditions.

9. Daily maintenance is very important. Small failures must be repaired and then put into use.

contact:

Name：Alisa Chen
Tel:  86 531 83216898  
Fax: 86 531 83216898 

Skype: +86 13853738666

E-mail:  dacheng@chinadicheng.com